Amendment record

Amendment 1 - November 2001
Schedule of amendments


Document Change Comments

WSSS

Various sections of Part 1 General, Part 2 Water Supply, Part 3 Sewerage and Approvals

Insert amendment record at front following revision record
Section Clause Page Change Comments

Document history and revision record

    

Updated to include Amendment 1

Remove original document history and insert revised version

Registration

    

Address and phone details updated

Remove registration and insert revised copy

Registration form

    

ACTEW address details revised

Remove original forms and insert revised forms

Order form

    

ACTEW address details revised

Comments form

    

ACTEW address details revised

Part 1 - general

T.O.C

2

Updated to reflect page re-numbering

Remove original pages and insert revised pages

1.1

4-5

ACTEW objectives revised to bring in line with Utilities Act 2000

1.3, 1.4, 2

6-7

Pages re-numbered

3.1, 3.2

8-9

1st paragraph revised and pages re-numbered

4

10

Page re-numbered

5

11

List of legislation documents updated

6 and 7

12

Page re-numbered

9

13

Reference 9.6 updated and page re-numbered

Part 2 - water supply

T.O.C

3

Updated to include new clause (5.8)

Remove original pages and insert revised pages

2.6

6

References to Clause 6.7 and WSS 020 added

3.5.1

13

Sentence revised to reference Clause 3.5.4

3.5.4

14

Both dot point sentences revised

4.2

16

Modified PVC and Molecular Oriented PVC included in list of approved materials; PVC pipe sizes expanded to include 375/450; Paragraph relating to change in material added

4.4

17

Sentence relating to construction loads added

4.6

18

Final paragraph revised

4.7

18

Paragraph revised (trench and scour stop requirements revised)

5.8

20

New clause related to Pressure Reducing Valves added

6.1

22

Developer responsibility revised; reference to drawing WSS 028 added; reference to 10.1 updated

6.3

22

Meter issue and sizing details revised

6.5

23

The word "ball" removed from "Main tapping, copper riser..."

6.6

23

PVC-M and PVC-O added to service materials; Sentence relating to stop cocks added

6.7

24

First paragraph relating to tracer wire revised in association with revised drawing WSS 020

8.2

27

Standards AS4441 and AS4765 added

9

29

WSS 012 and WSS 020 drawing titles revised; drwaings WSS 012, 016, 020, 026, 027 revised; drawing WSS 028 added to drawing set

10

30

Reference 10.1 updated

Water supply drawings

WSS 012

  

Drainage at scour stops removed; scour and trench stop dimensions revised; degree of compaction detail revised (zone C); use of scour stop between grades 5 and 15% added

Remove original drawings and insert revised drawings

WSS 016

  

Min/max depth to spring hydrant corrected; cover reference to Std Drg WSS024 added

WSS 020

  

Drawing completely revised with >= DN50 service connections removed onto WSS028; Material Schedule added; Drawing Notes revised

WSS 026

  

DICL/PE connection detail revised; clearance to hydrant and Note 12 removed; cover reference to Std Drg WSS024 added

WSS 027

  

Fig 1 "100" dimension amended to "25"; reference added to Fig 4

WSS 028

  

New drawing detailing >= DN32 services created in part from WSS 020 (draft)

Part 3 - sewerage

2.5

12

Table 3-3. PVC DN150 and 225 requirements revised

Remove original pages and insert revised pages

3.1.3 (iii)

20

Paragraph revised (trench stops added and drainage point requirements removed)

4.4

25

First dot point: the word "inverts" added; Second dot point: scour stops removed and sentence expanded

5.1.11 (i)

33

The word "highest" added prior to "incoming pipe"

5.1.12

33
34

Changed "1:200" to "1:20";
Dot point relating to standard configurations removed

5.1.15

36

Paragraph added (relating to drawing WSS 053)

5.1.16

37

Paragraph added (relating to drawing WSS 053)

5.1.17

38

(i) Reference to drawing WSS 053 added

6.2.1

41

Reference to 10.1 updated

6.2.3

42

6.2.5

42

Reference to drawing WSS 054 added

7.1.4

46

Reference to 10.1 updated

9

55

WSS 056 and WSS 058 drawing titles revised; Drawings WSS 052, 053, 054, 056, 058, 061 and 062 revised

10

56

Reference 10.1 updated
 
Section Clause Page Change Comments

Sewerage drawings

WSS 052

  

Trench drain removed; Note 8 revised and Note 10 removed; DICL socket at MH wall revised; Neck height in roads revised; iInterface at MH wall reference added

Remove original drawings and insert revised drawings

WSS 053

  

Type 4 bedding added to "Other Locations"; MH cover reference altered; neck height in roads revised; interface at MH wall reference added

WSS 054

  

Slope junction and tie bedding details revised; Property line to first socket dimension added; Note 1 requirements revised

WSS 056

  

Degree of compaction details revised; material specification detail revised

WSS 058

  

Class D concrete cover and frame removed; lifting recess detail removed

WSS 061

  

MS base support and trench fill details revised; ,etal cover and surround details revised/amended

WSS 062

  

Typographic error corrected (note 2, 1:20 replaces 1:200)

Approvals

T.O.C

3

Table of Contents updated to include new clause in Appendix H

Remove original pages and insert revised pages

1.1

4

First paragraph revised; second paragraph: "Corporation" removed after "ACTEW"

1.2

4

1st paragraph: "Corporations" removed after "ACTEW"

2.2.3

8

Requirement for form WSSS-1 added

2.2.6

9

Requirement for form WSSS-1 added

2.4.3

12

Reference to new clause added

2.4.4

12

First paragraph revised; Reference added to second paragraph

2.4.6

13

Second and third paragraphs: "ACTEW" replaces the word "inspector"

Appendix A

20

Hydraulic Services Deed definition revised

Appendix D

24

The word "trunk" removed (first dot point)

Appendix E

25

(ii) The words "and trench" and "thrust blocks, restrained joints" added after "positions of scour"

Appendix F

28

(i) Sentence relating to horizontally curved sewers revised;
(j) Property Connection requirements revised

Appendix H

33

6. Proving tool requirements revised (seventh dot point);

34

7. CCTV inspection requirements revised;

34

8. Both dot points revised to reflect associated changes in Pt 2, Clause 3.5.4

35

10. Dot point added to Product Certifications; Sentence relating to product certification and sample submittal added;
new Clause 11 added in relation to testing certificate requirements

Appendix I

36

Final dot point removed

Appendix J

37

Changed "the final inspection" to "all ACTEW inspections"

Appendix K

38

Changed "the final inspection" to "all ACTEW inspections";
2(e): Sentence revised (trench and scour stop requirements revised);
3(a): Sentence added

Appendix N

45

Paragraph added relating to list of trees; changed "Californian" to "Tasmanian" (final table);
the word "Not" added to first and second tables

Approvals forms

WSSS-0

  

ACTEW address details revised

Remove original forms and insert revised forms

WSSS-1

  

ACTEW address and Office Use details revised

WSSS-2

1

"No. of Dwellings" requirement and hydrant provision added; Connection Details removed;

2

ES Plan requirements revised; ACTEW address details revised

WSSS-3

  

ACTEW address details revised

WSSS-4

  

ACTEW address details revised

WSSS-5

  

Connection Details added (from WSSS-2)

Return to top

Amendment 2 - August 2005
Schedule of amendments


Section Clause Page Change Comments

APPROVALS

2.7

16

Work-as-Executed Records to be submitted prior to issue of Provisional Certificate. Fees may be applied.

Remove original pages & insert revised page

APPENDIX M

3

43

Work-as-Executed Records to be submitted prior to issue of Provisional Certificate. Fees may be applied.

Remove original pages & insert revised page

Amendment 3 - October 2006
Schedule of Amendments

Document Change Comments

WSSSRelease 2 Amendment 2 August 2005

Various sections of Part 3 - Sewerage

Insert Amdt Record at front following Revision Record
Section Clause Page Change Comments

Document History & Revision Record Part 3 - Sewerage

2.1.1

7

Delete Paragraph 3 of section (iii) replace with;

“To lessen the risk of overflows into houses the design should include (1) careful placement of maintenance holes to limit the number of connections into small near-maximum loaded sewers, and (2) the location of connection ties in accordance with Clause 6.2.2.”

Remove original pages& insert revised pages

6.1

41

Paragraph 4. Delete the following:

“and shall be on the low side of each property”

Remove original pages & insert revised pages

6.2.2

42

Delete Paragraph 4:

“The tie should generally… lowest corner of the block.”

Insert the following as Paragraph 4 of Clause 6.2.2:

“Where possible, the tie should generally be located on the sewer at 1.0 metre from the lowest corner of the property. However, it is permissible to locate the tie at a position other than the lowest corner of a residential block provided that

  • no more than fourteen (14) residential dwellings, and
  • no non-residential leases,are serviced upstream of that block.

In such circumstances, particular attention must be paid to the requirements of Clause 6.2.1 regarding the maximum permissible depth of a sewer tie, and also to the requirements of Clauses 4.2 and 6.2.1 relating to the servicing of an entire lease.”

Insert the following as Paragraph 8 of Clause 6.2.2:

“No more than three (3) consecutive service ties on a reticulation main are permitted to cross a roadway unless specifically approved by ACTEW.”

Remove original pages & insert revised pages
Contact us: 13 14 93 | Online enquiry